The Jamstik MIDI Guitars can now be updated over USB in the Jamstik Creator. You can access the firmware update by clicking on the hamburger button (☰) in the top left of the Jamstik Creator and then clicking "Check for Firmware Update". If the update does not launch or does not finish, check the troubleshooting information below or try updating with the Jamstik Control app on Android, Jamstik Control app on iOS, or visit play.jamstik.com/update on Chrome after making sure to close all MIDI software, including the Jamstik Creator, on your computer.
Jamstik Service Issue
If the Jamstik Creator does not allow you to update your firmware, there may be an issue with the Jamstik Service's connection to your Jamstik. This may be because your devices firmware is too low, you are connected over Bluetooth, or there is another issue with the Jamstik Service.
Visit the Jamstik Service Information and Troubleshooting article to diagnose Jamstik Service issues.
If you cannot resolve the Jamstik Service issues either use the Jamstik Control app on Android, Jamstik Control app on iOS, or visit play.jamstik.com/update on Chrome after making sure to close all MIDI software, including the Jamstik Creator, on your computer.
Update over Bluetooth
Firmware updates over Bluetooth are not currently supported. If you need to update over Bluetooth either use the Jamstik Control app on Android, Jamstik Control app on iOS, or visit play.jamstik.com/update on macOS.
Comments
0 comments
Article is closed for comments.