In some cases, you may find it necessary to do a hard reset of your jamstik to reset picking calibrations to factory settings. This can solve issues such as oversensitive strings resulting in cross-talk, dead or non-sounding strings, and other calibration issues.
Take the following steps to, "Hard Reset" your jamstik.
- Turn the jamstik on and wait for the amber sequence to be done.
- Press and HOLD the power button for about 30 seconds.
During this 30 seconds the following status changes should occur:
- Power light will turn off, but you must CONTINUE holding for 15 seconds, at which point the light will turn back on
- KEEP HOLDING until the light goes back OFF.
Your jamstik will now be reset to factory default settings.
3rd G string not recognized except in TAP mode. All other strings fine. Why?
Please sign in to leave a comment.